Sunoco Waylube 1180 - ISO VG 68 - Machine Tool Way and Slide Lubricant
Sunoco Waylube 1180 is an ISO VG 68 lubricant specially formulated for the lubrication of machine tool ways and slides. It eliminates stick-slip or table chatter by reducing friction between mating surfaces. It provides film strength and excellent EP protection when ways are heavily loaded.
Benefits
Sunoco Waylube 80 has metal wetting and adhesive agents that enable it to form uniform films that resist squeezing from way surfaces while the machine is not in operation. By preventing stick-slip, the wear of way surfaces is minimized and their service life is greatly extended. It is also designed with additives to prevent the mixing of the product with water based coolants.
Applications
- Machine applications where ways are present regardless of load, including slideways (vertical or horizontal), milling and screw machines, planers, shapers, drills, and lathers.
- Air-Operated hammers, breakers, and rock drills.
- As extreme-pressure (EP) lubricants where a tacky gear oil with EP properties are suitable in industrial gear boxes.
If your lubrication system has a common reservoir and hydraulic pressure remains under 1000 psi, Sunoco waylube is suitable and can be used as combination oils (waylube, gear oil, and hydraulic fluid).
Specifications
Cincinnati Fives Spec. No P-47
Typical Properties
| Property | WAYLUBE 1180 - 6753 |
| Viscosity, cSt @40° C (D445) | 68.0 |
| Viscosity, cSt @100° C (D445) | 9.1 |
| Viscosity Index (D2270) | 110 |
| Flash Point, COC °C, min. | 225 |
| Pour Point, °C max. | -35 |
| Stick Slip, ASTM D2877 | .70 |
| Cincinnati Fives Spec. No. | P-47 |
| Timken OK Load, lb. | 60 |
| 4-Ball Load Wear Index | 37.2 |
| 4-Ball Weld Point | 200 |
| Rust, Syn Sea Water | Pass |