Skip to main content
Image coming soon

Tectyl 1420 Haps Free Black

Tectyl

$0.00
(No reviews yet) Write a Review
Blog:
/blog/industrial-coatings-the-dark-horse-of-the-petroleum-industry/
Title:
The Dark Horse of the Petroleum Industry
Blog:
/blog/what-is-rust-and-how-can-i-stop-it/
Title:
What is Rust (and how can you stop its reign of terror)?
PDF URL:
TECTYL_1420_HAPS_FREE_BLACK_SDS
PDF Name:
Safety Data Sheet
PDF URL:
TECTYL_1420_HAPS_FREE_BLACK_PI_SHEET
PDF Name:
Product Data Sheet
PDF URL:
Tectyl-Manufacturer-Statements
PDF Name:
Manufacturer Statements
Video:
https://www.youtube.com/embed/KJimvpF_nO4
coatingsTool:
true
Adding to cart… The item has been added

Tectyl 1420 HAPS Free Black Emulsion Corrosion Preventive Coating

Tectyl 1420 Hazardous Air Pollutants (HAPS) Free Black Coating is a black, water-based, low Volatile Organic Content/Compounds (VOC), air-drying corrosion preventative compound designed for long-term, direct application on ferrous (iron-containing metals) and non-ferrous (iron-free metals) transportation components and equipment.

Tectyl 1420 HAPS Free Black Coating is free of hazardous air pollutants and is an excellent environmentally friendly corrosion inhibiting coating. Complying with strict Volatile Organic Compound (VOC) regulation, this water-based coating is formulated with little to no VOC’s. Providing better air quality in work area due to a subtler odor as well as an overall minimal impact on the environment.

Tectyl 1420 HAPS Free Black Coating will cure to a hard, black, and flexible, direct-to-metal protective film. Delivering excellent adhesion to a variety of surfaces, increased environmental durability, and significantly faster drying times.

Product Uses

  • Black, low Volatile Organic Compounds (VOC) of 2.8 lbs./gallon, Hazardous Air Pollutant (HAPS) Free Corrosion Protective Coating for industrially manufactured transportation parts, forged castings, and steel frames calling for an environmentally friendly coating.
  • An industrial coating suitable for intermodal chassis/containers, rail cars, road, and construction equipment.

Product Performance:

  • When applied at the recommended wet film thickness (WFT) of 4-7 mils over the surface profile, it will deposit the recommended dry film thickness (DFT) of 1-2 mils over the surface profile. 
  • Typically dries to a tack-free film in 25-30 min, dry to touch in 45-60 min, and fully cured after 24 hours. 
  • Covers 310 square ft. per gallon when applied at the recommended dry film thickness (DFT)
  • Can provide up to 1 year of outdoor protection and 2 years of indoor or undercover protection on metal and wood substrates at the recommended dry film thickness (DFT). 

Application Equipment Recommendations: 

  • Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
  • Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.017" to .021" tip orifice size)
  • Application using QUICKCOAT Precision Sprayer through a pressurized container.
  • High Pressure Fluid Hose of no less than 3/8 in. diameter is suggested for less than 50 ft. of material hose is required.
  • Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft. 
  • High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft. 

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.

!