Tectyl 7192 Non-Flammable, White/Tan, Water-Based Corrosion Inhibiting Rustproofing Cavity Wax
Tectyl 7192 is a premium water-based, rustproofing cavity wax compound cutback with mineral spirits designed for protecting automobiles from internal damage due to corrosion or rust.
Non-flammable and contains miniscule VOC (Volatile Organic Compounds), ideal for applications requiring low toxicity and safer handling in higher temperatures for automotive primed and unprimed surfaces.
This rust-proofing compound has a thin gel, but low viscosity that allows for film build on vertical surfaces and for seam penetration (capillary action) into areas with metal-to-metal overlap.
Tectyl 7192 is usually spray applied using a wand or hose that allows the user to spray deep inside car doors, frames, and various other voids. Once cured, the white liquid dries to form a wax-like, tan film that will effectively repel water, can self-heal, all whist maintaining sufficient flexibility (resisting cracking and adhesion loss) in temperatures as low as -30 °C.
When applied as an undercoating or rustproofing compound, Tectyl 7192 premium corrosion preventive compound wax leaves behind a long-term protective film that provides outstanding rust protection for enclosed automobile body sections or transportation equipment.
Trust Tectyl 7192 water-based corrosion preventive compound to provide maximum defense wherever a water displacing, long term, inner body corrosion preventive is needed.
Product Uses:
- White, Water-Based Corrosion Resistant Cavity Wax and Rustproofing Compound for quality protection of primed/unprimed automobile body surfaces, transportation equipment, and more.
- Superb corrosion preventative for new automobiles, trucks, and trailers.
- Effective protection of used transportation equipment with less than perfect substrates.
Product Performance:
- Firm wax-like film that will repel water, self-heal, and remain flexible (resisting cracking and adhesive loss) at low temperatures.
- When applied at the recommended wet film thickness of 12-14 mils over the surface profile, it will deposit the recommended dry film thickness of 5-6 mils.
- Dry to touch in 1 hour when sprayed at 5 mils wet, weather resistant after 8 hours, and fully cured after 24 hours.
Application Equipment Recommendations:
- Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
- Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.017" to .025" tip orifice size)
- High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
- Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
- High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft.
For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.