Skip to main content
Image coming soon

NOX-RUST 501-LS

Nox-Rust

$0.00
(No reviews yet) Write a Review
Blog:
/blog/industrial-coatings-the-dark-horse-of-the-petroleum-industry/
Title:
The Dark Horse of the Petroleum Industry
Blog:
/blog/what-is-rust-and-how-can-i-stop-it/
Title:
What is Rust (and how can you stop its reign of terror)?
PDF URL:
Nox-Rust_501LS_SDS
PDF Name:
Safety Data Sheet
PDF URL:
Nox-Rust_MIL-PRF-16173E_Solv-Cutb_PDS
PDF Name:
Product Data Sheet
PDF URL:
Tectyl-Manufacturer-Statements
PDF Name:
Manufacturer Statements
Video:
https://www.youtube.com/embed/KJimvpF_nO4
coatingsTool:
true
Adding to cart… The item has been added

NOX-RUST 501-LS Black Cold-Application Asphaltic Corrosion Preventive Compound QPL Approved MIL-PRF-16173E Grade 1, Class I

NOX-RUST 501-LS is a Qualified Product Listed (QPL) for use under Govt. Designation MIL-PRF-16173E; Class I, Grade 1, formulated to also fulfill the requirements of MIL-P-116J, Type P-1 Specifications.
Contrary to the Class II specification, Class I qualified products indicate higher Volatile Organic Content/Compounds (VOC), exceeding 2.8 lbs. per gallon (340 grams/liter).

NOX-RUST 501-LS is a black, solvent-based, asphaltic corrosion preventive compound cutback with mineral spirits designed specifically for long-term covered/uncovered and indoor/outdoor preservation.
Ideal for preserving and protecting metallic surfaces exposed to outdoor weather conditions for extended periods during domestic and international shipments requiring for a dry-to-touch film.

NOX-RUST 501-LS dreis to a black hard protective wax film that repels resists moisture, salt, and other corrosive elements.
This long-lasting and versatile corrosion inhibiting compound is an excellent cost-effective option for preventing corrosion on your metallic surfaces, thereby extending the lifespan of a wide range of equipment and machinery.

Product Uses:

  • Black Asphaltic Corrosion Preventive Compound formulated for exceptional general-purpose preservation and long-term protection of covered/uncovered, indoor/outdoor metals exposed to weather conditions like humidity or rainfall for extended periods during domestic and overseas shipping.
  • Can be used as a “Float Coat” by shipyards for difficult or unsafe rust inhibitor application to access voids, tanks, ballast areas, and rudders.
  • Used for protecting the interior of ship rudders on Naval vessels and large commercial ships using the fill and drain method.
  • Class I Volatile Organic Content/Compounds (VOC) exceeds 2.8 lbs. per gallon (340 grams/liter).
  • Removal is possible with mineral spirits (or another similar petrolatum solvent), hot alkaline wash, or low-pressure steam.

Product Performance:

  • When applied at the recommended wet film thickness (WFT) of 5-6 mils over the surface profile, it will deposit the recommended dry film thickness (DFT) of 2.5 mils.
  • Dry to touch and weather-resistant in 5-8 hours, and fully cured in 16 hours.
  • Covers 280 square ft. per gallon when applied at the recommended film thickness.
  • Can provide up to 2 years of outdoor protection and 5 years of indoor or undercover protection on metal substrates at the recommended dry film thickness.

Application Equipment Recommendations: 

  • Pumps with ratios of 15:1 or greater are advised for efficient use of container content.
  • Tungsten Carbide Nozzles Tip in the spray gun is recommended. (.015" to .021" tip orifice size)
  • High Pressure Fluid Hose of no less than 3/8 in. diameters is suggested for less than 50 ft. of material hose.
  • Low Ratio pumps (15-30:1): operate through 100 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 150 ft.
  • High Ratio pumps(>30:1): operate through 200 ft. of 1/2 in & 50 ft. of 3/8 in. hose for a max of 250 ft.
  • Can be brush or dip applied. 
  •  

For additional product information as well as storage and handling requirements, refer to the Product Data Sheet or Safety Data Sheet provided on this page.

!